Queclink GMT100 Especificações descarregar pdf (Página 53)

GMT00 @Track Air Interface Protocol

TRACGMT100AN001 – 52 –

3.2.19. Protocol Watchdog

The AT+GTDOG command is used to reboot the device in a time based manner or upon ignition.

This helps the device avoid working in an exceptional status for a long time. Besides these two

automatically reboot method, the device also supports to use the digital input to trigger the reboot

manually.

 AT+GTDOG=

Example:

AT+GTDOG=gmt100,1,,1,0130,,1,1,,,,,0012$

AT+GTDOG=gmt100,2,30,,,,1,1,,,,,0012$

Parameter

Length(byte)

Range/Format

Default

Password

4 – 6

'0' – '9' 'a' – 'z' 'A' – 'Z'

gmt100

Mode

0 – 2

Ignition Frequency

<=3

10 – 120 min

Interval

<=2

1 – 30 day

Time

HHMM

0200

Reserved

Report Before Reboot

0|1

Input ID

0|1

Reserved

Serial Number

0000 – FFFF

Tail Character

 <Mode>: Working mode.

 0: Disable this function

 1: Reboot periodically according to the <Interval> and <Time> setting.

 2: Reboot when ignition on.

 <Ignition Frequency>: When the working mode is 2, if the time interval between two

adjacent ignitions is greater than the specified value, the device will automatically reboot

upon ignition on.

 <Interval>: The interval to reboot the device in day.

 <Time>: At what time to perform the reboot operation when <Interval> is met.

 <Report Before Reboot>: Whether to report the +RESP:GTDOG message before reboot. 0

Queclink

Confidential

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 110 111

Comentários a estes Manuais

Sem comentários

Queclink GMT100 Especificações Página 53

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de navegação Queclink GMT100