Queclink GMT100 Especificações descarregar pdf (Página 27)

GMT00 @Track Air Interface Protocol

TRACGMT100AN001 – 26 –

port to trigger the IOB event. Set to 1 to use enable status as the trigger condition and 0 to use

disable status. Only when the logical status of all the input ports in one IO binding meets the

trigger condition is the IOB event triggered.

 bit0: ignition detection

 bit1: digital input 1

 <Input Sample Period>: The period to check the status of all the digital input ports in one IO

binding. AT+GTIOB and AT+GTDIS use independent sample period to check the input port

status even for the same input port.

 <Output ID>: ID of the output port to output specified wave when the trigger condition meets.

0 means no wave will be output.

Note:

If <Output ID> is set to 2 which is used for CUT relay, only <Output Status> could be used to

define how to output wave shape 1 as shown in Figure 2. In this case <Duration> and <Toggle

Times> should be empty. The following settings should keep the same with this note.

The acknowledgment message of AT+GTIOB command:

 +ACK:GTIOB,

Example:

+ACK:GTIOB,060100,135790246811220,,1,0006,20090214093254,11F0$

Parameter

Length(byte)

Range/Format

Default

Protocol Version

XX0000 – XXFFFF,

X∈{„A‟ – „Z‟,‟0‟ – „9‟}

Unique ID

IMEI

Device Name

<=10

'0' – '9' 'a' – 'z' 'A' – 'Z'

IOB ID

0 – 2

Serial Number

0000 – FFFF

Send Time

YYYYMMDDHHMMSS

Count Number

0000 – FFFF

Tail Character

Queclink

Confidential

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 110 111

Comentários a estes Manuais

Sem comentários

Queclink GMT100 Especificações Página 27

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de navegação Queclink GMT100