Queclink GL200 Especificações descarregar pdf (Página 26)

GV300 @Track Air Interface Protocol

3.2.7. Input/Output Port Binding

This command is used to configure the user defined output-port action triggered by input ports. If

the IO combination is set and the corresponding condition appears, the device will output specified

wave shape on the specified output port. Otherwise, the device will restore the initial status of the

specified output port. And the device will report message +RESP:GTIOB to the backend server

when the logical status of bound input ports changes.

¾ AT+GTIOB=

Example:

AT+GTIOB=gv300,1,F,A,3,1,0,8,3,,,,,0006$

Parameter Length(byte) Range/Format Default

Password 4 – 6 '0' – '9' 'a' – 'z' 'A' – 'Z' gv300

IOB ID 1 0 – 3

Input Mask 1 0 – F 0

Trigger Mask 1 0 – F 0

Input Sample Period <=2 0|1 – 12(×2s) 0

Output ID 1 0 – 3 0

Output Status 1 0|1 0

Duration <=3 0 – 255(×100ms) 0

Toggle Times <=3 0 – 255 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <IOB ID>: ID of the user defined IO binding.

 <Input Mask>: Bitwise mask for input ports composition. Each bit, from bit 0 to bit 3,

represents one digital input port. Set to 1 to enable and 0 to disable corresponding input port.

z bit0: ignition detection

z bit1: digital input 1

z bit2: digital input 2

z bit3: digital input 3

 <Trigger Mask>: bitwise mask for trigger condition composition of the corresponding input

TRACGV300AN002 – 25 –

Queclink

Confidential

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 118 119

Sem comentários

Queclink GL200 Especificações Página 26